Monitoring Mode - Reach Bee7 User Manual

REACH Bee7
l
User Manual
5.3
Videos Area
5.3.1 Non-monitoring mode
In non-monitoring mode, information in the Videos bar includes: bit rate, audio
signal, video connections, and recording state (record, pause, and stop), as shown in
Figure 5-4.
Click the corresponding status icon to start, pause, or stop a recording task:
When no video is recorded, click
displayed as
When a video is being recorded, click
When a video is being recorded, click
displayed as

5.3.2 Monitoring mode

In monitoring mode, you can monitor a maximum of nine video pictures concurrently.
When the video display mode is non-monitoring, click Monitoring to switch the
mode to monitoring, as shown in Figure 5-5.
F i gu r e 5 - 3
F i gu r e 5 - 4
to start recording, and the Room0 status is
.
to stop recording.
to pause recording, and the Room0 status is
.
All Rights Reserved © SZ REACH TECH CO., LTD. 24