Rear Panel Ports Description - Reach Bee7 User Manual

REACH Bee7
l
User Manual
No. Name
LCD
1
screen
2 V1
3 V2
4 V3
5 RUN
2.2

Rear Panel Ports Description

Description
Displays device information. For example, during the starting
process of Bee 7, Starting is displayed on the screen. After
the startup, information such as the system version, IP
address, subnet mask, and network gateway is displayed on
the LCD screen in scrolling mode.
The indicator is on when signals are input from the DVI IN 1
interface at the rear panel; the indicator is off when no signal
is input.
The indicator is on when signals are input from the DVI IN 2
interface at the rear panel; the indicator is off when no signal
is input.
The indicator is on when signals are input from the DVI IN 3
interface at the rear panel; the indicator is off when no signal
is input.
Indicator 7 specifies the operation status of Bee 7. When Bee
8 operates normally, indicator 6 blinks; when Bee 8 becomes
faulty, indicator 6 goes off.
All Rights Reserved © SZ REACH TECH CO., LTD. 8