Reach Bee7 User Manual page 32

REACH Bee7
l
User Manual
Click Browser to select an upgrade file. A prompt page for file selection will be
1
displayed.
Click Open (O).
2
Click Upgrade to upgrade the system. Bee 7 will reboot automatically after the
3
system upgrade is complete.
Rollback
Version rollback indicates that the Bee 8 system is rolled back to the previous version.
Click Rollback to roll back to the previous version.
Restart
Restarting the collecting device is to restart Bee 8.
Click Restart to restart Bee 8.
Terminal System Info
You can view information about Bee 8 (such as the device name and version number)
in this part.
6. Media Center (Pro)
6.1
Adding a Device (Bee 7)
Log in to the back-end management page of the media center.
1
Click Server Management in Configuration management.
2
Click Add.
3
Fill up information about Bee 7 (such as the IP address) in the prompted page.
4
Click OK to add a device (Bee 7).
5
All Rights Reserved © SZ REACH TECH CO., LTD. 32