Opening The Management Platform; Adding A Device - Reach Bee7 User Manual

REACH Bee7
l
User Manual
4.2

Opening the Management Platform

Double-click the shortcut of Beekeeper.exe on the desktop to open the management
platform.
4.3

Adding a Device

The management platform does not have information about the Bee 7 that is
connected to it for the first time. Therefore, you need to add information about the
Bee 7 to the management platform in Add a Device.
If Media Center is added, you can monitor the status of Bee 7 in all classrooms
managed by the media center. If Terminal is added, you can only monitor the status
of Bee 7 in a specific classroom.
The procedure of adding a Bee 7 to the management platform is as follows:
Click Add Device to open the parameter setting page, as shown in Figure 4-1.
1
Enter the IP address of Bee 7 in IP Address.
2
Enter a user-defined name of Bee 7 in Device Name.
3
Enter the username in User Name. The default value is admin.
4
F i gu r e 3 - 2
All Rights Reserved © SZ REACH TECH CO., LTD. 20