Lcd Panel; Buttons On The Front Panel; Network - Reach CL4000 Beyonsys User Manual

Table of Contents

3.2 LCD Panel

After the startup, some information about the device's status will be displayed on the

LCD panel, such as operating status, device model, IP address, subnet mask, gateway,

etc.. The device model will be displayed as "CL4000xxxxxx", and the IP address, subnet

mask and gateway will be displayed in turn as "xxx.xxx.xxx.xxx".

The users can use the buttons on the front panel to control the quick record, after the

device runs normally. The button's LED indicates the current operating status of the

device.

Mute button: The LED is off by default. It will be on after the button is pressed,

indicating that the sound is disabled during live streaming. Press it again, the LED will be

off and the system will recover to the normal live streaming.

Start recording button: The LED is off by default. When it is in stop record or pause

mode, the LED will be on and the system will start to record after this button is pressed.

Meanwhile, the Stop Recording LED or Pause LED will be off. It will start to record all the

audio, video and computer screen signals connected with the device.

Stop recording button: The LED is on by default. When it is in recording mode, the

system will stop recording and the Stop Recording LED will be on after this button is

pressed. Meanwhile, the Start Recording LED will be off.

Pause button: The LED is off by default. When it is in recording mode, the system will

pause recording and the Pause LED will be on after this button is pressed. Meanwhile, the

Start Recording LED or Pause LED will be off. Press the "Start Recording" button to

recover to the recording mode.

Camera button: Not available yet.

Set the network parameters properly according to the requirements of the network

administrator, making sure that the control computer can fully access the device through

network.

Enter the IP address of the device in the IE browser, and then press Enter key to visit

REACH CL4000（Beyonsys™）

User Manual

Table of Contents