Filters; Rotor Maintenance; Fans Maintenance - Salda RIRS EKO 3.0 400 VEL Mounting And Installation Instruction

6.4.

FILTERS

direction.
manual or on our website www.salda.lt
6.5.

ROTOR MAINTENANCE

• Maintenance of rotor heat exchanger must be performed on annual basis, once per year.
•
exchanger are tight.
•
clamp of the rotor heat exchanger section, and then remove the heat exchanger.
•
direct stream of liquid is not recommended, because this can cause damage to the device.
•
•
6.6.

FANS MAINTENANCE

•
• The fan should be inspected and cleaned at least once per year.
•
• Proceed to maintenance and repair after any fan rotation is stopped.
•
• The fans features a heavy-duty ball bearing design. The motor is completely sealed and free of maintenance.
• Detach the fan from the unit.
• The impeller should be particularly checked for built-up material or debris that may cause an imbalance. Excessive imbalance may lead to ac-
•
• Do not use high-pressure cleaner, abrasives, sharp tools or caustic solvents that may scratch or damage the housing and impeller.
14 | EN RIRS 400-700 V EKO 3.0 v2020.1