Forest-Master Fast Fire FM6FFE Manual page 9

Attach the operating lever handle (part 11) to rack engaging
lever on the log spliiter. The bolt and nut for securing the
handle have been fitted to it for shipping.
Stand Assembly
As has already been stated, because of the weight of the splitter, it will require two persons to attach
it to the stand
The bolts and nuts necessary to attach all the stand components have been fitted to the components
for shipping.
The easiest way to attach the stand is either on it's side with the flywheel on the ground or stood
vertically agaisnt a wall with the motor at the bottom. If standing it vertical you must secure it so it
can't fall over.
Remove the bolts and nuts from the front leg.
Attach the front leg to the mounting socket at the
front of the log splitter and secure with one of the
bolts and nuts just removed.
FM6FF & FM8FF (Electric & Petrol) 9