Forest-Master Fast Fire FM6FFE Manual page 8

Note that due to the weight of the item, assembly requires two persons
For shipping the rear leg mount is fitted in a reversed position. Before use, remove the bolt securing
this, turn the mount through 180 degrees and secure with the bolt.
rear leg mount
reversed
Insert the stub axles, parts 12 and 13 into the tube on the back of the rear leg mount. When looking
from the back of the machine, the short axle part 13 is inserted into the right hand side and the long
axle to the left. Secure the axles with the 2 M6 x 16 cap head bolts and 2 M6 nuts that are fitted in
the axles for shipping.
8
correct position
FM6FF & FM8FF (Electric & Petrol