Forest-Master Fast Fire FM6FFE Manual page 12

You should now lift the log splitter into the upright position. This must be done by two persons to
avoid the possibility of injury or damage to the log splitter. Check that all nuts and bolts are tight
before lifting the splitter upright.
ATTACH THE WORK BENCH AND GUARD
The work bench and guard are only necessary to comply with CE Approval and health and safety at
work legislation in the European Union. Outside of the European Union the individual user can choose
to just use the work bench.
Although the work bench is the best way to support the logs, for customers outside of the EU, a set
of basic log rails can be purchased to be used in place of the work bench. These are available on our
website https://forest-master.com/product/log-guide-rail-for-all-fm8-fm5-log-splitters/.
The work bench & guard package contains
1 x Work Bench (with rear brackets attached)
6 x Guard panels
25 x M6x12 Button Head Bolts (1 spare)
5 x M6x40 Cap Head Bolts (1 spare)
25 x M6 nyloc Nut (1 spare)
5 x M6 Spring Washers (1 spare)
53 x M6 Flat Washers (1 spare)
12 FM6FF & FM8FF (Electric & Petrol