Exchanging The Tank Water - Winterhalter C50 Operating Instructions Manual

Removing the wash racks from the outlet table
a: Table limit switch on the Winterhalter outlet table
 Remove the wash rack from the outlet table before the table limit switch is actuated
(Image 2).
INFO The table limit switch stops the rack conveyor and prevents a blockage if the
racks are not removed from the outlet table.
IMPORTANT The outlet table must be equipped with a table limit switch. The table limit
switch must be connected to the machine (see circuit diagram).
Terminating the rack conveyor
 Press the button for the selected rack conveyor speed.
Wash breaks
Do not switch the machine off during wash breaks in order to prevent cooling off.
Switching the machine off
Switch off the machine at the end of the working day using the drainage programme ( 18),
so that it is cleaned and emptied every day.

16 Exchanging the tank water

If the water in the tank is very dirty, it can be easily exchanged.
 Tank of the machine is first completely emptied, then refilled and heated.
Terminating the tank water exchange
 Press the button.
 The tank of the machine is refilled and heated.
17