Table of Contents
Advertisement
Pictogram
Cause/meaning
Table limit switch actuated
Rack conveyor is blocked
Water drain is blocked or
drain pump is defective
Strainer in the tank is
clogged. Machine goes into
standby.
Poor cleaning result
INFO
The water quality affects the washing and drying performance. We therefore
recommend from a total hardness of more than 3° dH (0.53 mmol/l) that the ma-
chine is supplied with softened water.
The dishes do not get clean
There is formation of layers
on the dishes
Possible Cause
No or low detergent dosing
Dishes incorrectly sorted
Jets of the wash arms
blocked
Temperatures are too low
In case of limescale depos-
its:
The water is too hard
In case of starch residues:
Excessively high tempera-
tures during manual pre-
cleaning (hand shower)
Remedy
Remove the wash rack from the
outlet table.
Remove the block (e.g. jammed
dishes).
Contact an authorised service tech-
nician.
Remove, clean and re-insert the
strainer.
Press the
or
the rack conveyor.
Remedy
Contact an authorised
service technician to set
the dosing amount.
Check dosing hose (for
kinks, breakage, ...)
Replace the storage con-
tainer if empty.
Do not stack dishes one
over the other.
Remove the wash arms
and clean the jets.
Check temperatures ( 10)
Check external water trea-
tment.
The temperature of the
manual pre-wash should be
a maximum of 30 °C
button to restart
19
Hide quick links:
Advertisement
Table of Contents
