Fingerprint Reader - HP Pavilion 14 Maintenance And Service Manual

3. Lift the right side of system board (2), and then pull the system board right and away from the
connectors to remove it from the computer (3).
Reverse this procedure to install the system board.

Fingerprint reader

To remove the fingerprint reader, use this procedure and illustration.
Table 5-13 Fingerprint reader description and part number
Description
Fingerprint reader, natural silver
Fingerprint reader, warm gold
Fingerprint reader, fog blue
Fingerprint reader cable
Before removing the fingerprint reader, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the fan (see
5. Remove the system board (see
Remove the fingerprint reader:
1. Remove the Phillips M2.0 × 2.0 screw (1) that secures the fingerprint reader bracket to the computer.
2. Remove the bracket from on top of the fingerprint reader (2).
46 Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
Battery on page 29).
Fan on page 40).
System board on page
27).
44).
Spare part number
M08880-001
M08881-001
M08878-001
M16618-001
27).