Speakers - HP Pavilion 14 Maintenance And Service Manual

6. Lift the top of the touchpad up (3), and then pull it away from the bottom of the computer to remove it
(4).
Reverse this procedure to install the touchpad.

Speakers

To remove the speakers, use this procedure and illustration.
Table 5-7 Speaker description and part number
Description
Speaker Kit
Before removing the speakers, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the solid-state drive (see
Remove the speakers:
1. Disconnect the speaker cable from the system board (1).
2. Remove the Phillips M2.0 × 3.0 screw from each speaker (2).
Preparation for disassembly on page
Bottom cover on page
Battery on page 29).
Solid-state drive on page
27).
32).
Component replacement procedures
Spare part number
M16640-001
27).
37