Memory Module (For Selected Models) - Lenovo ThinkPad T14 Gen 2 User Manual

Troubleshooting
If the computer does not start up after you reinstall the base cover assembly, disconnect the ac power
adapter and then reconnect it to the computer.

Memory module (for selected models)

Prerequisite
Before you start, read
Generic Safety and Compliance Notices
Attention: Do not touch the contact edge of the memory module. Otherwise, the memory module might get
damaged.
For access, do the following:
1. Disable the built-in battery. See "Disable Fast Startup and the built-in battery" on page 42.
2. Turn off the computer and disconnect the computer from ac power and all connected cables. Then,
close the computer display.
3. Remove the nano-SIM-card tray if your computer comes with one. See "Connect to a cellular network
(for selected models)" on page 9.
4. Remove the base cover assembly. See "Base cover assembly (T14 Gen 2 and P14s Gen 2)" on page 42
or "Base cover assembly (T15 Gen 2 and P15s Gen 2)" on page 44.
46
T14 Gen 2, T15 Gen 2, P14s Gen 2, and P15s Gen 2 User Guide
and print the following instructions.