Download Print this page

Speaker Assembly; Always On Usb 3.2 Connector Gen 1 Board And Bracket - Lenovo ThinkPad T14 Gen 2 User Manual

Hide thumbs

Advertisement

Table of Contents

Speaker assembly

Prerequisite
Before you start, read
Generic Safety and Compliance Notices
For access, do the following:
1. Disable the built-in battery. See "Disable Fast Startup and the built-in battery" on page 42.
2. Turn off the computer and disconnect the computer from ac power and all connected cables. Then,
close the computer display.
3. Remove the nano-SIM-card tray if your computer comes with one. See "Connect to a cellular network
(for selected models)" on page 9.
4. Remove the base cover assembly. See "Base cover assembly (T14 Gen 2 and P14s Gen 2)" on page 42
or "Base cover assembly (T15 Gen 2 and P15s Gen 2)" on page 44.
Removal procedure

Always On USB 3.2 connector Gen 1 board and bracket

Prerequisite
Before you start, read
Generic Safety and Compliance Notices
For access, do the following:
1. Disable the built-in battery. See "Disable Fast Startup and the built-in battery" on page 42.
and print the following instructions.
and print the following instructions.
Chapter 6
.
51
CRU replacement

Advertisement

Table of Contents
loading

  Related Manuals for Lenovo ThinkPad T14 Gen 2