AXIOMTEK AIE800-904-FL Series User Manual page 34

AIE800-904-FL Series User's Manual
Step 2. Please contact our sales or FAE for the latest JetPack.
Untar the files and assemble the root file system with the command below:
sudo tar xpf imagefilename
【Note】:
Step 3. Start flash JetPack:
⚫
Plug in the power cable for the AIE800-904-FL to boot up the system and
enter recovery mode.
⚫
Press hotkey: Ctl+Alt+T on the host to enter to the terminal window.
⚫
Change directory to the Linux_for _Tegra folder:
cd Linux_for_Tegra
⚫
Execute the command below on the host to install the image.
./axiomflash.sh
⚫
The flashing procedure takes approximately 10 minute s or more. Upon
completion, AIE800-904-FL will automatically reboot, and please set JP1 to
"Normal Mode" to return to standard mode.
【Note】:
connected to AIE800-904-FL
Step 4. Congratulations, you have successfully installed JetPack on the AIE800-904-FL
The default login credentials are:
【Caution】:
$ sudo apt upgrade
Running
the BSP of the AIE series platform, which can cause unexpected results
including losing I/O ports. For regular JetPack updates or reflashing, please
contact our sales or FAE to get the latest AIE Series JetPack image.
26
Please type your full image name instead of imagefilename
Please open the command prompt window on the host system which is
Username: nvidia Password: nvidia
command for NVIDIA JetPack OTA may overwrite
JetPack Flash Method