Table of Contents
Advertisement
Reset all your screening announcements:
Using a cordless handset or the telephone base:
1. Press CALL BLOCK on the handset or telephone base to
enter the call block menu when the telephone is not in use.
- OR -
MENU
1. Press
on the handset or telephone base in idle
mode to enter the main menu. Then, press q CID or p
to scroll to Smart call blk. Press SELECT.
2.
Press q CID or p
on the handset or telephone base to
scroll to Screening annc, then press SELECT.
3.
Press q CID or p
on the handset or telephone base to
scroll to Reset annc, then press SELECT. The screen shows
Reset to default annc?. Press
shows Annc. reset to default before returning to the
previous menu.
-OR-
While an announcement is playing, press MUTE/DELETE
on the handset, or press DELETE on the telephone base.
The screen shows Annc. Deleted before returning to the
previous menu.
Your name will be deleted from all the screening
announcements, and the telephone will use the default
screening announcements. See Screening announcements.
YES
to confirm. The screen
Voice guide to set Smart call blocker
This feature is an easy and alternative way for you to do the
basic setup of Smart call blocker. You can follow the voice
guide to set your telephone system to allow or to screen all
incoming home calls, or to screen home calls that do not
display a phone number.
1. Press CALL BLOCK on the handset or telephone base to
enter the call block menu when the telephone is not in use.
- OR -
MENU
1. Press
on the handset or telephone base in idle
mode to enter the main menu. Then, press q CID or p
to scroll to Smart call blk. Press SELECT.
2. Press q CID or p
SELECT. You hear a voice prompt, "Hello! This voice guide
will assist you with the basic setup of Smart call blocker..."
3. Set up your Smart call blocker feature by inputting
designated numbers, as instructed in the voice guide.
•
Press 1 if you want to screen home calls with telephone
numbers that are not saved in your phonebook, allow
list or star name list; or
•
Press 2 if you do not want to screen calls, and want to
allow all incoming calls to get through.
NOTES
• The screening feature of Smart call blocker is applicable to home
calls only. All incoming cell calls will get through and ring. If you
want to block a cell call, add the number to the block list. See Block
list.
• You can press OFF/CANCEL on the handset or press CANCEL on
the telephone base to quit the voice guide at any time.
• After a power outage, the system prompts you to set the date and
time. After the date and time setting is done or skipped, the system
then prompts if you want to set up Smart call blocker via voice
YES
guide. Press
to start the setup.
46
to scroll to Voice guide, then press
Advertisement
Table of Contents
