Advertisement
Img. 2-7:
Gear
Tighten the Allen screws firmly after exact positioning of the gears.
Mount the hand knob.
Plug the connector of the mounting adapter and automatic feed together.
Slide the gear protective cover over the gear and fasten the cover.
2.5
Limit switch mounting
Remove the dial pointer from the cross table.
Img. 2-8:
Dial pointer
Attach the limit switch on the bracket with two Allen screws.
Img. 2-9:
Limit switch mounting
Fix the power cable
Operation and mounting V99S
Version 1.0 dated 2019-01-31
Drive gear
automatic feed
Cross table gear
Dial pointer
Limit switch
Translation of the original instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
V 99 S │V 250 S
®
GB
Page 7
Advertisement
