Advertisement
Attach the scale ring with the scale nut.
Img. 3-8:
Scale mounting
Mount the crank handle back to the milling machine and fix the crank handle with the nut.
Check the crank handle for smooth operation.
Img. 3-9:
Universal table feed mounting
3.5
Limit switch mounting
Position the limit switch in the center of the cross table so that the
adjustable stop hits the limit switch.
Img. 3-10: Limit switch
Attach the limit switch on the bracket with two hexagon screws.
Img. 3-11: Limit switch mounting
Operation and mounting V250S
Version 1.0 dated 2019-01-31
Scale holder
Scale nut
Fixing nut
Crank handle
Limit switch
Adjustable stop
Limit switch
Limit switch bracket
Translation of the original instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
V 99 S │V 250 S
®
GB
Page 13
Advertisement
