Advertisement
ATTENTION!
Do not switch the drive from left to right rotation during operation. Wait until the
universal table feed has stopped.
The limit switch turns off the automatic feed with reaching the preset position.
Disconnect the electrical supply cable at a longer standstill of the machine from the power
supply.
3.9
Rapid traverse
Move the turning direction lever in the required direction.
Press the button for rapid traverse.
Once you release the button the machine will proceed at the preset speed.
WARNING!
When the feed motor is operating in fast motion, do not touch moving parts or rotating
parts.
Make sure there are no other people in the danger zone.
ATTENTION!
During manual operation the stops may collide with the end stop switch. This can cause
damage to the end stop switch.
Operation and mounting V250S
Version 1.0 dated 2019-01-31
Translation of the original instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
V 99 S │V 250 S
®
GB
Page 15
Advertisement
