Table of Contents
Advertisement
2.2 Standard delivery
The following parts are included in the delivery:
Article No.: 2160.123K:
• 3 Cross-cut templets with 1 mm, 2 mm and 3 mm cut spacing
• 1 NT-cutter with 9 mm width of edge
• 1 Roll adhesive tape (length: 22 m, width: 25 mm)
• 1 Certificate of manufacturer
• 1 Carrying case
Article No.: 2160.123G:
• 3 Cross-cut templets with 1 mm, 2 mm and 3 mm cut spacing
• 1 NT-cutter with 9 mm width of edge
• 1 Brush
• 1 Magnifier
• 1 Roll adhesive tape (length: 22 m, width: 25 mm)
• 1 Certificate of manufacturer
• 1 Carrying case
The cuttings of the NT-Cutter are sharpened and could cause injuries by
incorrect handling! Operators need to achieve an appropriate security
instruction.
2.3 Options
• Magnifier
• Brush
• Adhesive tape (1 roll of 22 m, width 50 mm)
• Adhesive tape (1 roll of 65 m, width 25 mm)
page 6
last update: 24.06.2009
Advertisement
Table of Contents
