Delivery Of Apparatus; Damages During Carriage - Proceq ZCT 2160 Instruction Manual

2. Delivery of apparatus

2.1 Damages during carriage

During carriage the Proceq ZCT 2160 is to be handled with the usual care.
To ensure carriage without damages the device is to be transported in the
original packaging and under normal freight conditions. Pushes during
carriage are to be avoided.
At the receipt of the goods, you have to check if there are any visible
damages at the outer packaging. If the packing is alright, you can sign the
receipt documents. If you even suspect by your visual impression that
damage has occurred, make a note of the suspected damage on the
delivery receipt or freight papers and get the carrier to sign it. Moreover, the
forwarding agent/courier service must be held responsible for the damage
in writing.
If a hidden damage is discovered while unpacking, you have to inform and
must held the forwarding agent / courier service immediately in the
following way: "When opening the parcel we had to notice that .... etc. etc."
This superficial checking of the goods has to be done before the time limit
of the forwarding agent / courier service expires which is normally within 7
days. However, the period could be less. Hence, it is recommended to
check the exact time limit when receiving the goods.
If there are any damages inform also immediately your authorized
PROCEQ trader or Proceq SA directly.
last update: 24.06.2009 page 5