Finally, IPCP has the negotiated IP options, again separated according to the channel:
IP-address
Again the Rx options have the addresses that were assigned by the remote station
and the Tx options have those that the ELSA LANCOM assigned to the remote station
DNS-default
(e.g. the IP address of the dial-up node at the Internet provider can easily be read in
the Tx options).
NBNS-
default
Status/TCP-IP-statistics
The TCP/IP-related statistics are shown here, broken down according to the various TCP/
IP sub-protocols. The TCP-IP statistics contain the following parameters:
/TCP-IP-
statistics
ARP-statistics
IP-statistics
ICMP-statistics
TFTP-statistics
TCP-statistics
DHCP statistics
DNS-statistics
Delete-values
The substatistics then provide you with further parameters for the individual menus.
Status/TCP-IP-statistics/ARP-statistics
These statistics include the following values:
ARP-LAN-rx
Number of ARP requests and responses received from the LAN
ARP-LAN-tx
Number of ARP requests and responses sent to the LAN
ARP-LAN-errors
Number of ARP requests incorrectly received from the LAN
ARP-WAN-rx
Number of ARP requests and responses received from the WAN
ARP-WAN-tx
Number of ARP requests and responses sent to the WAN
ARP-WAN-errors
Number of ARP requests incorrectly received from the WAN
Table-ARP
Displays ARP table
Delete-values
Deletes ARP statistics
Description of the menu options
Statistics from the TCP/IP area
Statistics from the ARP area
Statistics from the IP area
Statistics for ICMP packets
Statistics for TFTP operations
Statistics for TCP packets from TCP sessions to the router
Statistics from the DHCP server
Statistics from the DNS server
Deletes TCP/IP statistics
ELSA LANCOM DSL/10 Office
R13
Need help?
Do you have a question about the Lancom DSL/10 Office and is the answer not in the manual?
Questions and answers