The Management Information Base (Mib) - ELSA Lancom DSL/10 Office Manual

20 Configuration modes
This procedure can also be done with Edit MIB Vars.. in the Manage menu. Here click
until you reach the table, click once on the table column that is to be set, enter the new
index after the name of this column in the field Variable Name and the value in
Variable Value. There should now be a new table row after clicking Set.
Error messages via SNMP trap
Error or warning messages can be sent to a manager using the SNMP mechanism. The
SNMP agent contained in the router permits traps to be sent to up to 20 SNMP managers.
The IP addresses of these managers are configured in the Configuration menu under
/
. You can enable and disable the
setup/SNMP-module/IP-Trap-Table
transmission of trap messages using the
/setup/SNMP-module/Send-Traps
.
switch
SNMP and ELSA LANmonitor
The following three entries /setup/SNMP-module/ ...Register-monitor, .../Delete-
Monitor and .../Monitor-table are only relevant for the automatic login of the
ELSA LANmonitor and are of no further importance to the user. They are only displayed
in the menu for information purposes.

The Management Information Base (MIB)

A textual representation of the configuration structure (the so-called private MIB) must
be supplied with the ELSA LANCOM DSL/10 Office so that the SNMP management
system can access its configuration. The syntax of this MIB complies with ASN.1
(Abstract Syntax Notation One, ISO 8824). There is usually a so-called MIB compiler
included with the SNMP management software. This compiler converts the MIB file into
a form that can be used by the manager.
The current ELSA MIB can be found both included with the product on CD and in the
ELSA online media.
ELSA LANCOM DSL/10 Office