Other - ELSA Lancom DSL/10 Office Manual

– If the device no longer responds and it is therefore impossible to log in, the
'manual': The third option allows you to set a period (Timeout firmsafe) beforehand
K
for testing the new firmware. The device will start with the new firmware and wait
for the preset period until the loaded firmware is manually activated and therefore
becomes permanently effective.

Other

The Other menu allows you to manage the following functions:
/Other
Manual-dialing
Boot-system
Reset-system
System-upload
Other/Manual Dialing
Select this option when you wish to establish a connection manually for testing
purposes.
This option allows you to reboot the device.
Boot-system
Before executing the command all open connections (DSL or TCP) will be released or
closed.
This option resets all the settings that have been entered. The device is reset to the
Reset-system
delivery version.
For safety's sake, the system asks you to enter the configuration protection password in
order to ensure that you have not mistakenly selected this command instead of the
Boot-system
second time.
Upload-system This option starts a firmware upload (refer to chapter 'How to set up new software').
The flash ROM technology permits flexible and service-friendly handling of the system
software by allowing different firmware versions to be read in. It also allows devices can
be retrofitted for all future options.
firmware will only be permanently activated when the login occurs successfully
within the time set under 'Timeout firmsafe'.
firmware automatically loads the previous firmware version and reboots the
device with it.
command. If no password has been assigned, you must press Enter a
Description of the menu options
Various functions
Connection testing
Boots the device.
Resets to factory settings.
Loads new firmware.
ELSA LANCOM DSL/10 Office
R49