Mitsubishi Electric MR-J5D-G User Manual page 42

When the network is not connected
■For CC-Link IE TSN
The network connection status is displayed for each axis.
1-axis drive unit
Network status
The 7-segment LED display during initialization is as follows.
Display
3 STRUCTURE
40
3.2 Switch setting and display of the drive unit
2-axis drive unit
B-axis network status
A-axis network status
Status Description
Controller not connected Indicates that the drive unit is not connected to the controller.
Data not linked Indicates that initial communication for CC-Link IE TSN is in progress.
Cyclic communication in Indicates the Pre-Operational state shown in the state transition diagram of the NMT
progress state machine.
Indicates the Safe-Operational state shown in the state transition diagram of the NMT
state machine.
Cyclic communication Indicates that the drive unit is in the state of the reserved station.
being stopped
3-axis drive unit
C-axis network status
B-axis network status
A-axis network status