Mitsubishi Electric MR-J5D User Manual page 71

■ABSV (Absolute position erased)
ABSV turns on when the absolute position is undetermined.
Page 135 ABSOLUTE POSITION DETECTION SYSTEM
■MTTR (Tough drive in progress)
MTTR is always off.
■CLDS (Fully closed loop control in progress)
When the fully closed loop control is in progress, the CLDS is on.
3
■CVST (Converter stop)
CVST turns on when the ready-on command is received.
It turns off when an alarm that stops the converter main circuit occurs.
MR-J5 User's Manual (Troubleshooting)
■MBR (Electromagnetic brake interlock)
MBR is off in the servo-off state or at an alarm occurrence.
If using the device, set an operation delay time of the electromagnetic brake in [Pr. PC02].
For details. refer to "Electromagnetic brake interlock function" in the following manual.
MR-J5 User's Manual (Function)
■VLC (Limiting speed)
If the speed reaches the speed limit value in the torque mode, VLC will turn on. VLC will turn off in the servo-off state.
The device cannot be used in the position mode or the velocity mode.
For details, refer to "Speed limit" in the following manual.
MR-J5 User's Manual (Function)
3 SIGNALS AND WIRING
69
3.5 Signal (device) explanation