2. Configuration and Run Procedures
2. Configuration and Run Procedures
2.1 Configuration
The sample applications are configured as shown below.
SVT17602_sample
+---drivers
+---temphumi
|
main.c
|
testFact.c
|
boot.c
|
demoAdc.c
|
demoClock.c
|
demoLcd.c
|
demoRfc.c
|
demoSvd.c
|
demo.launch
|
.cdtproject
|
.gnu17project
|
.project
|
svt17602_sample_gnu17IDE.cmd
|
svt17602_ample_gnu17IDE.lds
|
svt17602_sample_gnu17IDE.mak
|
svt17602_sample_gnu17IDE.par
2.2 Run procedures
[1] Project import
(1) Launch the IDE and import the "svt17602_sample" project.
*
For detailed information on import methods, refer to "3. Software Development Procedures" in the S5U1C17001C
Manual.
[2] Build
(1) Use the IDE to build the "svt17602_sample" project.
[3] Connection, power supply
(1) Connect the ICD board, CPU board, and PC.
(2) Reset the ICD board.
[4] Program loading
(1) Modify the path to fls17602.elf within the command file, if necessary.
The default path is C:\EPSON\GNU17\mcu_model\17602\fls\fls17602.elf.
*
Refer to the S5U1C17001C Manual for detailed information on modifying command files.
(2) Use the IDE to load the "svt17602_sample" project.
2
Driver source group
Temperature/humidity calculation program
Main program
Board inspection program
Boot program
Illuminance demo program
Clock demo program
LCD demo program
Temperature/humidity demo program
SVD demo program
Project launch file
Project file
Project file
Project file
GDB command file
Linker script file
Make file
Parameter setting file
EPSON
S5U1C17602T1100 Software Manual