Clock [Clock]; Time Display [Time]; Time Setting [Clk Adjust] - Epson S5U1C17602T1100 Software Manual

3.5 Clock [CLOCK]

3.5.1

Time display [TIME]

This function displays the time held internally.
Set the time as described in "3.5.2 Time setting."
The clock will continue to count even while other functions run.
The clock counts up from 00:00:00 immediately after launching the program.
Restarting the SVT17602 CPU board resets the clock to 00:00:00.
Press SW2 to return to the function selection menu display.
3.5.2

Time setting [CLK ADJUST]

Press SW1 and SW2 simultaneously in clock display mode to call the clock setting function.
This function is used to set the clock.
First, set the hours. Minutes and seconds will not appear while you set the hours.
Use the rotary SW to select the correct hour.
Press SW1 or the rotary SW to confirm hours, then proceed to set minutes.
Adjust minutes using the rotary SW in the same way as for hours. Press SW1 or the rotary SW to confirm minutes, then proceed to
set seconds.
Adjust seconds using the rotary SW. Press SW1 or the rotary SW to confirm seconds.
Once, hours, minutes, and seconds have been set, the display will automatically revert to Time display (TIME).
S5U1C17602T1100 Software Manual
EPSON
3. Basic Function Operation
5