Program Launch; Function Selection Menu - Epson S5U1C17602T1100 Software Manual

3. Basic Function Operation

3.3 Program launch

Load the program to the SVT17602 CPU board as described in "2.2 Run procedures" in this document. This command will launch
the program, initialize the peripheral devices, and display "HELLO17602" on the LCD panel for 3 seconds. The display then
switches to menu display.
Press SW1 or the rotary SW as instructed on the LCD panel to call functions.

3.4 Function selection menu

The following menu is displayed on the LCD panel 14SEG.
Rotate the rotary SW clockwise or counterclockwise to select from the menu.
Press SW1 or the rotary SW to enter the menu selected.
EPSON
4 S5U1C17602T1100 Software Manual