GAS GAS ENDURO 4T EC 2014 Owner's Manual page 53

Owner´s manual
Maintenance
1
2
3
4
5
Removing the rear shock
To remove the rear shock from the frame follow these steps:
1. Stabilize the bike with a stand or a support.
2. Keep the rear wheel off the ground.
3. Loosen the seat clamping screw (1) and remove it by pulling it back.
4. Remove the silencer (see "Silencer change" in point 10).
5. Disengage the side covers of their hooves on the radiator (2).
6. Disengage the side covers of their hooves on the fuel tank (3).
7. Loosen the carburettor flange in filter air side (4)
8. Loosen and put out two lower screws that fastening subframe, in both
sides (5).
-53-