GAS GAS ENDURO 4T EC 2014 Owner's Manual page 46

Owner´s manual
Maintenance
1
2
3
5
6
Changing the rear brake pads
To change the rear pads follow these steps:
1. Remove the pin protector (1).
2. Loosen and remove the pin (2).
3. Remove the pads (3).
4. Keep the metal plate (4) and the fiber plate (5) if the new pads does not
have them.
4
5. Loosen the screws (6) and remove the lid of the brake fluid.
6. Put a paper around the brake fluid reservoir to prevent falls.
7. Retract the caliper piston taking care not to damage it.
8. Place the pin and protector.
9. Place the tank cover.
10. Operate the brake pedal several times to get the right feeling.
-46-