Screens In Normal Mode - GAS GAS ENDURO 4T EC 2014 Owner's Manual

Owner´s manual
Multifunction gauge (Only on certain models and markets)
Adjust the clock format:
Select the desired format using the buttons 1 or 2 (12H or 24H).
Setting the time:
Set the clock to the desired time by pressing 1 to 2.
Setting the maintenance reminder method:
Select the desired maintenance reminder method using the buttons 1 or 2.
ODO: Odómeter. kilometers based.
ART: Accumulated driving time, hours based.
Setting the maintenance reminder:
Select the value until the next maintenance. This value is based on time or milea-
ge, depending on the method chosen on the previous menu (ODO / ART).

SCREENS IN NORMAL MODE:

Screen 1: DST
DST (Distance Traveled). DST function accumulates the distance data since the last
reset while you're riding a motorcycle.
Press and hold buttons 1 and 2 for three seconds to reset
DST (distance 1).
Hold the button 3 to set the DST. Use buttons 1 and 2 to increase and decrease
the DST.
Press the 3 button to return to main menu.
Screen 2: DST2
DST2 (Distance Traveled 2). The multifunction ENDURANCE II, can accumulate
data from two different travel distances.
Press and hold buttons 1 and 2 for three seconds to reset
DST2, driving time and average speed.
Hold the button 3 to set the DST. Use buttons 1 and 2 to increase and decrease
the DST.
Press the 3 button to return to main menu.
-22-