Technical Data - Hilti TE 60 Original Operating Instructions

Designation
Chuck adapter
TPS Theft Protection System
with Company Card, Company
Remote and TPS‑K key
Quick-release chuck
Mixing paddles for non-
flammable materials, with
smooth or hex. shank
Dust removal system
The TE 60 (3) is suitable for setting HDA undercut anchors when used with the specified setting tool
Electrogal-
Size
vanized
x
M 10
x
M 12

4. Technical data

Right of technical changes reserved.
NOTE
The power tool is available in various voltage ratings. Please refer to the type identification plate for details of
the power tool's voltage and power rating.
Power tool
Rated power
Rated voltage / rated current
Mains frequency
Weight in accordance with EPTA procedure
01/2003, TE 60
Weight in accordance with EPTA procedure
01/2003, TE 60‑ATC‑AVR
Dimensions (L x W x H), TE 60
Dimensions (L x W x H), TE 60‑ATC‑AVR
Hammer drilling speed
Single impact energy in accordance with the EPTA
procedure 05/2009 (full power setting)
Short designation
TE FY‑BA‑C
TE DRS‑B, TE DRS‑S,
TE DRS‑BK
HDA‑P, HDA‑PF,
HDA‑T, elec- HDA‑TF,
trogalvanized sherardized
x x
x x
TE 60 / TE 60‑ATC‑AVR
1,300 W
Rated voltage 110 V: 14.8 A
Rated voltage 230 V: 6.9 A
50...60 Hz
6.4 kg
7.7 kg
480 mm x 115 mm x 274 mm
490 mm x 115 mm x 293 mm
350/min
7.3 J
Item number, description
Adapter
206999, optional
For wood and metal drill bits with
smooth or hex. shank
Ø 80...120 mm
HDA‑PR,
HDA‑TR,
Setting tool
stainless
steel
x
TE‑Y‑HDA‑ST
20 M10
x
TE‑Y‑HDA‑ST
22 M10
en
21