Page 1
TE 60 / TE 60-ATC Operating instructions Mode d’emploi Manual de instrucciones Manual de instruções Printed: 21.08.2013 | Doc-Nr: PUB / 5071026 / 000 / 03...
Page 2
This Product is Certified Ce produit est homologué Producto homologado por Este produto está registrado Printed: 21.08.2013 | Doc-Nr: PUB / 5071026 / 000 / 03...
In these operating instructions, the designation “the Always keep these operating instructions to- power tool” always refers to the TE 60 / TE 60-ATC gether with the power tool. combihammer. Ensure that the operating instructions are...
The power tool is an electrically-powered combihammer with pneumatic hammering mechanism. The ATC (Active Torque Control) feature incorporated in the TE 60‑ATC provides greater working comfort for the user when drilling. The tool is designed for drilling in concrete, masonry, metal and wood and can also be used for chiseling.
Page 6
2.2 Chuck TE‑Y (SDS max) quick-change “click” chuck (TE 60 / TE 60‑ATC) 2.3 Switches Speed-control switch for smooth hole-starting / chiseling Function selector switch: Hammer drilling, chiseling, chisel adjustment (24 positions) Power selector switch for full or reduced (50%) power (ATC) Control switch lockable for chiseling 2.4 Grips...
∅ 80…120 mm (3"...4³⁄₄") materials, with smooth or hex. shank Dust removal system TE DRS‑B, TE DRS‑S, TE DRS‑BK The TE 60 (3) is suitable for setting HDA undercut anchors when used with the specified setting tool HDA‑PR, HDA‑P, HDA‑PF, Electrogalva- HDA‑TR,...
6.4 kg (14.11 lb) Weight, TE 60‑ATC 7.5 kg (16.53 lb) Dimensions (L x W x H), TE 60 480 mm (18.9") x 115 mm (4.53") x 274 mm (10.79") Dimensions (L x W x H), TE 60‑ATC 490 mm (19.29") x 115 mm (4.53") x 293 mm (11.54")
Page 9
Keep cutting tools sharp and clean. Properly main- 5.1.3 Personal safety tained cutting tools with sharp cutting edges are less a) Stay alert, watch what you are doing and use likely to bind and are easier to control. common sense when operating a power tool. Do g) Use the power tool, accessories and tool bits etc.
CAUTION Check that the clamping band is en- Tighten the side handle securely by turning the gaged in the groove provided on the power tool. grip section. This also clamps the depth gauge in Secure the side handle by turning the grip clockwise. position.
Page 12
Press the control switch fully to continue working at a special connection end are used. Drill bits of this kind full power. are available from Hilti. For example, when the keyless quick-release chuck is fitted, smooth-shank drill bits for Do not apply excessive pressure. This will not in- wood or steel can be used to drill without hammering.
Blinking red light See section “Troubleshooting”. damaged or when the controls do not function faultlessly. 8.4 Maintenance If necessary, the power tool should be repaired by Hilti WARNING Service. Repairs to the electrical section of the power tool may be carried out only by trained electrical specialists.
A fault has occurred in the power tool. If necessary, the power tool should be and the LED blinks red. repaired by Hilti Service. The power tool doesn’t start The carbon brushes are worn. Have it checked by a trained electrical and the LED lights red.
10 Disposal Most of the materials from which Hilti power tools or appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking back your old power tools or appliances for recycling. Please ask your Hilti customer service department or Hilti representative for further information.