Installation And Connection - Bartscher Deli-Cool PRO 2/1 GN Instruction Manual

•
Do not use any accessory or spare parts that have not been recommended by the
manufacturer. These can be dangerous for the user or lead to damages of the
device or personal injury, and further, the warranty expires.
•
Do not drill any holes inside and outside the device and do not fix any other objects.
•
Do not place heavy objects on the device.
•
Do not move and tilt the device during operation.
WARNING! Hazard via electrical current!
The device can cause injuries due to improper installation!
Before installation the local power grid specification should be compared with
that of the device (see type label).
Connect the device only in case of compliance!
Take note of the security advice!

5.2 Installation and connection

Setting up
•
Unpack the device and remove all packaging material. Remove the protective film
from the device.
•
Place the device on a flat, safe surface which can withstand the weight of the device.
•
Never place the device on an inflammable surface.
•
To prevent compressor damage, do not tilt the device more than 45° during
arrangement or transport.
•
Do not place the device near open fireplaces, electric heaters, heating stoves or
other heat sources such as direct sunlight. Heat can damage surface of the device,
affect the cooling capacity and increase energy consumption.
•
Set up the device so that sufficient air can circulate freely. Keep a minimum distance
of 5 cm from walls and other objects. Leave enough space for the operator on the
operation side.
•
Never cover the ventilation openings of the device.
•
Do not place the device in areas with high humidity or high temperatures, as such
conditions may result in damage of the device.
- 26 -