Connection
•
Prior to first use, let the device stand still for at least 2 hours before you connect it to
the power supply.
•
After power failure or unplugging the device, wait 5 minutes before you connect it to
the power supply.
•
The power socket circuit must be protected with at least 16A fuse. Connect the
device directly to wall outlet, power strips or multiple sockets shall not be used.
•
Place the device so that the plug is accessible. Thus, the unit can be quickly
disconnected from the mains when needed.
5.3 Operation
Before the first use
•
Clean the device after unpacking and before the connection according to the
instructions in section 6.2 "Cleaning".
•
Clean the GN containers before use.
Digital temperature controller
Setting buttons and indicator lights
⑬
Temperature increase button
⑭
LED cooling indicator
⑮
LED defrost indicator
⑯
Button with LED lighting
⑬
⑭
⑱
⑲
⑮
⑰
SET-control/save button
⑱
Digital display
⑲
Temperature decrease button
⑯
⑰
- 27 -