Download Print this page

Spectrum Industries 55540 Assembly Instructions

Flip-up shelf for link and core lecterns

Advertisement

Quick Links

Assembly Instructions
Assembly Instructions
Assembly Instructions
Assembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt. To
report information regarding missing parts or damage, to purchase parts or acces-
sories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
Link Lectern hardware
For metal side panels
(16) 0100167
8-32 x 1/2" PH
Thread-cutting screw
(1) Flip-up shelf
assembly
(1) 039622
2" Grommet
For laminate side panels
(16) 051696
8-32 x 1" PHMS
(16) 0285
3/16 Flat Steel
Washer
(16) 021588
8-32 Keps Nut
26"D
[66 cm]
Flip-up Shelf
Flip-up Shelf
for Link and CORE Lecterns
for Link and CORE Lecterns
55540
55540
CORE Lectern hardware
(8) 8-32 x 1-1/2"
PHMS
15.25"W
[38.7 cm]
7"D
[17.8 cm]
0191814R2 Page 1 of 4

Advertisement

loading
Need help?

Need help?

Do you have a question about the 55540 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Spectrum Industries 55540

  • Page 1 (1) Flip-up shelf assembly Flip-up Shelf Flip-up Shelf for Link and CORE Lecterns for Link and CORE Lecterns (1) 039622 55540 55540 2” Grommet Link Lectern hardware CORE Lectern hardware For metal side panels For laminate side panels (16) 0100167 (16) 051696 (8) 8-32 x 1-1/2”...
  • Page 2 Link Lectern (55115) installation: Link Lectern (55115) installation: Before you begin determine: Installation video available See www.spectrumfurniture.com • The side of the lectern the shelf will be installed (left or right side) • The shelf position: (Upper or lower) Laminate side panels •...
  • Page 3 CORE Lectern (55550) installation: CORE Lectern (55550) installation: Drill laminate side panel(s) for flip-up shelf ” 3/16 The (8) starter holes on the back of the laminate side panel need to be drilled through before installing. Drill with 3/16” drill bit Tip: Masking tape can be used on the laminate-side to minimize chip-out.
  • Page 4 Do not exceed 35 lbs [15.9 kg] of weight on shelf. 925 FIRST AVENUE, CHIPPEWA FALLS, WI 54729 / 800-235-1262 / 715-723-6750 / WWW.SPECTRUMFURNITURE.COM 925 FIRST AVENUE, CHIPPEWA FALLS, WI 54729 / 800-235-1262 / 715-723-6750 / WWW.SPECTRUMFURNITURE.COM © 2021 Spectrum Industries Inc., All rights reserved. 0191814R2 Page 4 of 4...