L) Spare Parts; L01 Spare Parts In General; L02 Ordering Spare Parts - EBRO ARMATUREN SBU Original Assembly Instructions With Operating Instructions And Technical Appendix

Operating instructions - SBU IO-Link
L) Spare parts
L01 Spare parts in general
When procuring spare and wearing parts, original parts from EBRO ARMATUREN Gebr. Bröer GmbH and
from the manufacturers of bought-in parts are to be used. Please note that spare parts not supplied by the
respective manufacturer have not been tested and approved. The installation and/or use of such parts may
therefore negatively change structurally-related properties of the SBU IO-Link and thus impair its active or
passive operational safety.
The manufacturer accepts no liability whatsoever for damage caused by the use of non-original parts and
accessories.
The list of spare and wearing parts can be found in the appendix to these operating instructions.
L02 Ordering spare parts
The following details must be supplied with each spare part order:

Type.

Article number.

Order number.

ID no. or drawing no. (parts catalogue).
If these four points are disregarded we cannot guarantee prompt handling of the spare parts order.
Page 49 of 50