Table of Contents
Advertisement
Operating instructions - SBU IO-Link
A04
Terms used
SBU IO-Link
The term SBU IO-Link is used in the following text for these incomplete machines for acquiring the signals
of the 0° and 90° positions of valves actuated by pneumatic quarter turn actuators or linear actuators.
Operating personnel
The term operator is used in the following text for the operating personnel or the user of the SBU IO-Link.
This group of people has been trained on the SBU IO-Link and informed about possible hazards.
A05
About these operating instructions
These operating instructions apply to the SBU IO-Link in the standard version. The purpose of the SBU IO-
Link is to detect the end positions (0° and 90°) of the valves with the help of the actuation of pneumatic
quarter turn actuators or linear actuators, to process them with microprocessor assistance and to make
them available to an existing interface for further processing.
The SBU IO-Link in the form delivered by EBRO ARMATUREN is an incomplete machine that is intended
to be attached to a pneumatic quarter turn actuator with a VDE/VDI 3845 interface or optional detached for
a linear actuator.
You must follow these operating instructions when operating the SBU IO-Link.
These operating instructions are intended to be used for safe working on and with the SBU IO-Link and are
a considerable help for the successful and safe operation of the SBU IO-Link.
They contain important information that will help you to operate the SBU IO-Link safely, properly and
economically and to use the full range of functions of the SBU IO-Link. Observing them will help to avoid
hazards, to reduce repair costs and downtimes and to increase the reliability and prolong the service life of
the SBU IO-Link.
In addition, the operating instructions are intended to enable the user to carry out maintenance and repair
work on the SBU IO-Link himself for daily use. They contain safety information that must be observed.
All persons who work on and with the SBU IO-Link must have the operating instructions to hand during
their work and must observe the information and instructions relevant to them.
The operating instructions must always be complete and in a fully legible condition.
EBRO ARMATUREN Gebr. Bröer GmbH has compiled all the data in this documentation with the greatest
of care. Despite that, EBRO ARMATUREN cannot rule out deviations and reserves the right to make
technical modifications to the SBU IO-Link without prior notice. EBRO ARMATUREN accepts no legal
responsibility or liability for any damage that may occur as a result. Necessary changes will be included by
EBRO ARMATUREN in subsequent editions.
Page 7 of 50
Advertisement
Table of Contents
