EBRO ARMATUREN SBU Original Assembly Instructions With Operating Instructions And Technical Appendix page 14

Operating instructions - SBU IO-Link
This EBRO-SBU IO-Link , which
a) will be installed as a complete functional unit in a complete system

directly on a pneumatic quarter turn actuator with the attached interface according to VDI/VDE
3845 AA2 80 mm x 30 mm and 30 mm (max. dia. 30 mm) shaft height,
b) should normally detect the 0° (closed) and 90° (open) positions.
c) The microcontroller-assisted switch box has the following interfaces:

Terminal point for two 24 V DC solenoid valves

Terminal point for two external sensors

Terminal point for two analog sensors

Terminal point for the closed/open feedback signals

Terminal point for a collective error

IO-Link connection for configuration and parameterization

Bluetooth 4.0 LE interface for the visualisation of the operating state and parametrisation
options.
Page 14 of 50