EBRO ARMATUREN SBU Original Assembly Instructions With Operating Instructions And Technical Appendix page 36

Operating instructions - SBU IO-Link

Move the butterfly of the valve to the CLOSED position so that the valve is fully closed.

Make sure that the pneumatic actuator is depressurised.

Secure the SBU IO-Link appropriately against slipping, tipping over or falling down.
DANGER Danger due to incorrect attachment.
Very serious damage to the SBU IO-Link .
Do not suspend the SBU IO-Link on attachment devices as there are no
attachment points for this.
Ensure safe manual transport of the SBU IO-Link .
Ensure that the SBU IO-Link is safely packed.

Unscrew and remove the cover, release all the electrical cables and pull them out of the housing.

Undo the four interior hex socket-head screws and pull the SBU IO-Link off the quarter turn
actuator.

Remove the four loosened screws from the interior.

Screw the cover back onto the lower part and secure the SBU IO-Link in a suitable transport box.
Page 36 of 50