Table of Contents
Advertisement
Operating instructions - SBU IO-Link
J)
Storage, packaging and transport
J01
Storage
If you do not install the SBU IO-Link immediately, ensure suitable storage conditions in dry, dust-free, frost-
free indoor rooms protected against sunlight. Wrap the SBU IO-Link in cardboard, plastic or film
packaging.
In order to keep the unused SBU IO-Link in a functional condition even over a maximum period of six
months, please observe the following storage conditions:
the storage room should be dry and free from dust.
the storage temperature should be between + 5 °C and + 40 °C.
the SBU IO-Link should be stored on a level floor.
the SBU IO-Link should be protected against inadvertent movements and damage.
the SBU IO-Link should be protected against static discharge.
J02
Packaging
The complete SBU IO-Link from EBRO ARMATUREN Gebr. Bröer GmbH is packed safely and fit for
purpose in accordance with the transport route and destination.
Note.
INFO
On arrival at the destination the completeness of the shipment must be checked
immediately against the shipping documents and packing lists; the intactness of
the shipment must also be checked.
EBRO ARMATUREN Gebr. Bröer GmbH is to be notified immediately in case
of complaints.
J03
Transport in general
Unless agreed otherwise, the SBU IO-Link will be delivered fully factory-preassembled by EBRO
ARMATUREN Gebr. Bröer GmbH.
For the transport, observe the specified weights and dimensions in the delivery documents of the SBU IO-
Link .
The SBU IO-Link should be kept in the factory packaging until use or installation. The specified storage
conditions must be adhered to.
DANGER
Danger due to incorrect transport or incorrect attachment.
Very serious damage to the SBU IO-Link .
Do not suspend the SBU IO-Link on attachment devices as there are no
attachment points for this.
Ensure safe manual transport of the SBU IO-Link .
Keep the SBU IO-Link in the original factory packaging until reaching the place
of use.
Page 47 of 50
Advertisement
Table of Contents
