Table of Contents
Advertisement
Operating instructions - SBU IO-Link
B03
Organisational measures
The SBU IO-Link has been designed and built in accordance with the state of the art and recognised
safety rules. In order to avoid danger to the users and impairment of the SBU IO-Link and other material
assets, the following organisational measures are to be adhered to:
observance of the intended purpose of use of the SBU IO-Link .
operation of the SBU IO-Link in a technically flawless condition.
assignment of sufficiently qualified personnel.
adherence to the maintenance intervals.
observance and adherence to the hazard signs and markings on the SBU IO-Link .
observance of these operating instructions.
The operating instructions are to be stored permanently and ready to hand near the SBU IO-Link . The
personnel assigned to carry out tasks on the SBU IO-Link must have read the operating instructions, in
particular the chapter "Safety information", before starting work. This applies in particular to personnel who
only work occasionally on the SBU IO-Link .
Spare parts must meet the technical requirements attained during the commissioning of the SBU IO-Link .
This is guaranteed with original spare parts from EBRO ARMATUREN Gebr. Bröer GmbH.
The environment of the SBU IO-Link must be kept tidy and clean. Dirt and hampering of the function of the
SBU IO-Link as well as restrictions in the freedom of movement of the user can lead to errors and
accidents.
The SBU IO-Link may be operated only by personnel with the appropriate qualifications.
It is the duty of the operating personnel to check the SBU IO-Link at regular intervals (at least once per
day) for outwardly visible damage and defects. Any changes that occur that are detrimental to safety,
including changes in the operational behaviour, must be reported and rectified immediately.
B04
Safety information for the operating personnel
The SBU IO-Link may only be used in a technically flawless condition as well as for its intended purpose,
in a safety and hazard-conscious manner and in accordance with these operating instructions! All faults,
especially those that could affect safety, must be rectified immediately!
Each person assigned to the installation, commissioning, operation or maintenance of the SBU IO-Link
must have read and understood these operating instructions in their entirety – in particular the chapter
Safety information – before starting work. This especially applies to personnel who only occasionally work
on the SBU IO-Link .
No liability will be accepted for damage and accidents that occur due to disregarding the operating
instructions.
The relevant accident prevention regulations as well as the other generally recognised safety rules and
rules of occupational medicine must be followed.
The responsibilities for the various activities in the context of the operation, service and maintenance of the
SBU IO-Link must be clearly defined and adhered to. Only in this way can human errors be avoided, in
particular in dangerous situations.
The operating company must obligate the operating and maintenance personnel to wear personal
protective equipment. This includes in particular safety shoes, protective gloves, safety glasses, protective
clothes and, if necessary, ear protection and close-fitting work clothes.
Do not wear long hair hanging loose, loose clothing or jewellery! There is a fundamental risk of injury due to
being caught up, pulled in or dragged by moving parts!
If you discover safety-relevant changes to the operational behaviour of the SBU IO-Link or faults in the
SBU IO-Link , it must be shut down immediately and the occurrence is to be reported to the responsible
person!
Page 15 of 50
Advertisement
Table of Contents
