Table of Contents
Advertisement
Operating instructions - SBU IO-Link
A11
Instruction and training
It is your duty as the operating company to inform the operating and maintenance personnel or instruct
them about existing safety and accident-prevention regulations as well as about the safety devices existing
on the SBU IO-Link .
The different technical qualifications of the employees are to be taken into account.
The operating personnel must have understood the instruction. In addition, it must be ensured that attention
is paid to the instruction. Only in this way can safety and hazard-conscious working of your personnel be
achieved. This should be checked regularly. As the operating company you should therefore have
participation in the instruction or training confirmed in writing by each employee.
If there is still a need for training of the operating personnel after handover of the SBU IO-Link to the
operating company, please contact EBRO ARMATUREN Gebr. Bröer GmbH to discuss the conditions.
A12
Marking of the SBU IO-Link
Each SBU IO-Link is marked with the following data on the housing or on the type plate:
Example of an SBU IO-Link standard version (outside of a
potentially explosive zone)
The type plate describes the temperature range, electrical data, EBRO article no. and IP protection class
applying to the SBU IO-Link . In addition, the date of manufacture and the CE mark are also printed on it.
So that the installed SBU IO-Link remains identifiable, it should not be covered.
Page 11 of 50
Advertisement
Table of Contents
