Fisher Engineering SNOWPLOW Owner's Manual page 97

6. HT Series™ Blades: Fill the reservoir to
within 2-1/2" from the top of the fill hole and
replace the fill plug.
HS Compact Plows: Check the fluid level in
the reservoir. The fluid level should be 1-1/2"
to 2" below the top of the reservoir. Add the
recommended hydraulic fluid, if necessary. Do
not overfill.
HT Series™ Blades
Breather/Fill Plug
Drain Plug
Lit. No. 72446, Rev. 05
MAINTENANCE
HS Compact Plow Blades
Breather/Fill Plug
Drain Plug
98
XtremeV™, EZ-V
®
Straight Blades: Fill the reservoir to the top
of the fill hole and replace the fill plug.
For fluid recommendations see "Annual Fluid
Change" in this section.
Straight
Blades
Fill
Plug
Drain
Plug
, XV2™, XLS™, and other
EZ-V Blades
Drain Cap
November 15, 2020
Fill
Plug