Ballast Requirements - Fisher Engineering SNOWPLOW Owner's Manual

VEHICLE APPLICATION INFORMATION

BALLAST REQUIREMENTS

Ballast (additional weight) is an important part of
qualifying vehicles for snowplow eligibility. Rear
ballast must be used when necessary to remain
in compliance with axle ratings and ratios as
specified by the vehicle manufacturer.
If ballast is required, it is important that it be
secured properly behind the rear axle. A ballast
retainer kit is available from your FISHER
(PN 62849).
NOTE: The ballast retainer kit is for snowplow
vehicles requiring ballast. See your FISHER
outlet for the correct amount of ballast
required. Include the weight of the retainer as
part of the ballast requirement. Sand bags are
recommended for use as ballast.
Lit. No. 72446, Rev. 05
NOTE: Ballast recommended and its weight
calculations assume the entire width of the
bed is filled as close to tailgate as possible.
outlet
®
15
Position
and secure ballast
as close to the tailgate
as possible.
November 15, 2020