Hydraulic System; Fluid Level - Fisher Engineering SNOWPLOW Owner's Manual

HYDRAULIC SYSTEM

Fluid Level

CAUTION
Do not mix different kinds of hydraulic
fluid. Some fluids are not compatible and
may cause performance problems and
product damage.
NOTE: On XtremeV™, XV2™, XLS™, and
EZ-V blades, add fluid only when all rams are
®
retracted.
NOTE: Remove fill plug slowly to relieve any
pressure in reservoir.
1. Park the vehicle on a hard, level surface. With
the Minute Mount
®
vehicle, activate the control.
Lit. No. 72446, Rev. 05
MAINTENANCE
2 system attached to the
2. For straight blades, any angle will do, but for
XtremeV, XV2, EZ‑V, and XLS blades, move
the blade wings to the fully retracted (vee)
position.
3. Activate the control FLOAT function and
manually collapse the lift ram all the way.
4. Turn the control OFF.
5. Remove the fill plug.
XtremeV & XV2 Blades
Fill
Plug
Drain
Cap
97
XLS Blades
Fill
Plug
Drain
Cap
November 15, 2020