Postseason Maintenance - Fisher Engineering SNOWPLOW Owner's Manual

• Install auxiliary and flashing lights for
compliance and visibility in accordance with
local regulations.
• Check headlamps, auxiliary lights, heater, and
windshield wipers for proper operation.
• Inspect and test your battery. Recharge or
replace as necessary.
• Ballast may be necessary, or beneficial, on
some vehicles to provide maximum traction,
braking, and handling.
• Any ballast material (such as sand and
blocks) must be solidly secured to the vehicle
preventing it from moving under harsh plowing
conditions.
Lit. No. 72446, Rev. 05
MAINTENANCE

POSTSEASON MAINTENANCE

Servicing the trip springs without special
tools and knowledge could result in
personal injury. See your authorized
FISHER
NOTE: Coat all electrical connections with
dielectric grease.
• Clean and paint blade and attachments as
needed.
• Be sure lift ram is fully collapsed so the rod is
not exposed.
• Apply general purpose petroleum grease
to exposed chrome surfaces of the rams to
prevent rust.
• Lubricate all pivot points (e.g., connecting
pin assembly and lower spring anchor) with
general purpose petroleum grease.
84
CAUTION
outlet for service.
®
November 15, 2020