Fisher Engineering SNOWPLOW Owner's Manual page 65

1. Lower the blade to the ground before making
the adjustment.
2. Remove the hydraulic unit cover.
XtremeV™, XV2™, and XLS™ hydraulic units:
Raise the top cover retainer, remove the bottom
cover retainer, and remove the rear cover.
3. Turn the quill IN (clockwise) to decrease drop
speed. Turn the quill OUT (counterclockwise)
EZ-V
Quill
Lit. No. 72446, Rev. 05
OPERATING YOUR SNOWPLOW
Blades
®
to increase drop speed.
4. Stand 8 feet clear of the blade when checking
adjustment.
5. Replace the hydraulic unit cover.
XtremeV™, XV2™, and XLS™ units:
Replace the cover and reinstall the top and
bottom cover retainers.
XtremeV & XV2 Blades
66
XLS Blades
Top
Cover
Retainer
Quill
Bottom
Cover
Retainer
November 15, 2020